Phone: +86-592-6011196 Email: allanzhang@xmaccent.com

Detail

Home / News / Detail

..

Curtain rod installation method and precautions

2018-10-25 13:20:48

Curtain rod installation method

1. Scribe: Take the support under the curtain as the standard scribe line, and draw the support positioning line and hole position line. The three supports, the middle support is located in the center of the window or wall, and the ends must be equidistant. The support at both ends is about 15-20 cm away from the wall or 5-10 cm from the end of the Roman rod.

2, punching: when the curtain rod is installed, its drilling depth should be between 3.5cm and 5cm, of course, it can not run the eye and skew; in the hole, you must pay attention to keep away from the wire and water pipe, its punching is completed After that, press the plastic expansion tube into the hole.

3. Mounting rod: The support is fastened by self-tapping; the lifting ring is inserted into the rod, the lifting ring is divided into two, and one ring is left at each end; the Roman rod is pressed into the opening support, and the two ends are decorated. The distance from the head to the wall is the same.

4. Hanging curtains: After the curtains are put on the hooks, it is enough to hang one end of the hooks into the holes of the rings. However, after hanging the curtains, the curtains should be opened and closed to check whether the sliding is flexible or not. Is the height the same?

Curtain rod installation precautions

1. Level: The price increase, but the quality is declining, especially the affordable housing and the building. Some roofs are inclined about 10cm, and the floor unevenness of the paving is 5cm, and the wall shows a ladder. shape. Therefore, it is best to use a level and a horizontal tube when installing the curtain rod.

2, the height of the roof: In order to show the beauty of the exposed curtain rod, then you must pay attention to the top of the room and the height of the window to avoid the feeling of depression and suffocation.

When installing on the wall, that is, the wall is installed, the pole and the ceiling should be around 6cm to 12cm. When installed on the roof and ceiling, which is referred to as the top security, the Roman pole should be about 6cm to 10cm away from the wall to prevent the curtain from opening and closing, rubbing the wall surface and staining the curtain fabric.

3. There is room for it: During the installation process, the window frame is reserved for less than 6cm, which is to make the curtain rod have a place to make the curtain cloth completely cover the window. When the curtain cloth covers the entire wall, the length of the Roman rod (excluding the decorative head at both ends) is about 18-22 cm shorter than the indoor width. After the installation, the decorative head of the Roman rod has a gap of about 2— -6cm

With the improvement of people's living standards, the curtain rod material on the market will be more and more, and the installation of curtain rods with different materials and styles will be different. Generally, it is best to install it with a professional installation master. 

Want to know more content click this link

Inquiry

Meeting customer needs is our only goal and motivation

We offer the best quality, the best service and the fastest response, just to reassure the customers